News

  • 0
  • 0

Global concrete foaming agent market trend 2024-2026 How is Foamed Concrete Used in Construction? by Newsuffizi2014

Analysts at JPMorgan recommended selling or "underweight" emerging market local currency sovereign debt because of the global impact of the Ukraine-Russia crisis.

JPMorgan estimated that fixed-income assets in emerging markets have lost 6-9 percent of their value since Russia invaded Ukraine a month ago, with nervousness about the war and its impact on global energy and food prices adding to existing pressures.

Some leading emerging market central banks are signaling that interest rates now need to rise faster than previously expected, which fuels fears of "stagflation". Stagflation means when high inflation and higher interest rates undermine economic growth.  

With both the U.S. Federal Reserve and emerging market central banks raising interest rates, JPMorgan also said it made sense to "underweight" emerging market assets by taking advantage of the recent pullback in local currency bond yields relative to TREASURIES.  

JPMorgan said major metals exporters such as South Africa, Chile, and Peru could still do well, but warned that emerging market fixed income assets now faced a more "stagflationary" trajectory.

The markets and prices of many commodities, metals, chemicals like the concrete foaming agent still face uncertainty.

What is foamed concrete?  

Foamed concrete is a highly entrained sand cement with at least 20% air volume in the cured product. It is made of cement slurry and can contain up to 85% foam or air. Most foamed concrete applications require at least 50% foam or air by volume.  

 

To make the concrete foam, air is mechanically entrained through the preformed foam.  This is mixed with cement-based materials to form low-density composites.  

 

The density of set foamed concrete is also adjustable. They range from about 400kg/m3 to 1,800kg/m3, with strengths ranging from 0.5N/mm2 to 12N/mm2.  

 

Foamed concrete is also known as foamed concrete, or lightweight honeycomb concrete (LCC), low density honeycomb concrete (LDCC), aerated lightweight concrete, honeycomb lightweight concrete, as well as various other industry or brand specific terms and (perhaps more accurately) foam mortar, foam grout and foam cement.  

 

It is mainly made of coarse aggregate, but is made using a liquid concrete slurry. That's why foam mortar, grout, or cement might be a more accurate description of the material.  Density is controlled by replacing some or in some cases all fine aggregate with foam products.  

 

Fly ash and sand usually form fine aggregate mixed with water and cement. Some manufacturers recommend using only water and cement and foaming agents to produce extremely light concrete mixtures.


How to make foamed concrete?  

The concrete slurry is mixed with the aerated foam product in the concrete mixing plant.  To create the foam, the manufacturer mixes the foaming agent with water and air from the generator. It produces consistent bubbles of high stability to resist chemical and mechanical strains of concrete mixing, pouring, casting and solidification.  

 

Foamed concrete can be poured into molds or pumped directly into structural elements.  With foam, the concrete slurry can flow freely. This is because the bubbles of inflating foam are thixotropic.  

 

Viscous pastes take up to 24 hours to fully cure, but can be accelerated to as little as 2 hours using the steam curing method. These techniques raise temperatures up to 70 °C to speed up the curing process. The required temperature depends on variables such as ambient humidity and external temperature, as well as the specific mixture of foamed concrete.  

 

Foamed concrete can be taken out of the mold once it is fully set, although in some foamed concrete manufacturing applications the material is cut into blocks of the desired size using steel wire before it is fully set.

The base mixture of foamed concrete products tends to have a much higher cement content than the standard concrete mixture used for flat plate and structural applications. There are two reasons for this. First, the amount of air trapped in the foam bubbles in concrete decreases the strength of the material exponentially at a higher inflation rate. Secondly, the water content in the concrete slurry will linearly reduce the strength of concrete at a higher hydration rate.  

 

In general, the foamed concrete mixture contains more water than conventional concrete.  This can be easily pumped and well mixed with foam additives. Water-reducing agents and plasticizers used to minimize water content in conventional concrete also generally perform poorly when mixed with foaming agents.  

 

Dry protein-based foams commonly used as foaming agents (or surfactants) for this application can expand up to 20 times when diluted in water. The surfactant is diluted at a concentration of 3 to 5 percent and stirred through a cigar-shaped extruder to produce a stable mixture with foam.  

 

In the 1990s, synthase - based foaming agents were developed to improve foam stability.  The enzyme includes highly active biotechnological proteins that are not based on proteolysis.  

 

These new surfactants are enhanced by specialized foam generation, mixing and pumping equipment to significantly improve the stability of foam and foamed concrete.  Now, the density of foamed concrete can be as low as 75kg/m3, which is only 7.5% of water.


Foamed Concrete Application  

Foamed concrete is already widely used in infrastructure projects, including highways, commercial buildings, disaster relief, schools and residential developments around the world.  

 

It is primarily used for void-filling applications and has been used in many built environments.  In landscaping, it is used for bridge approaches, embankments and trench backfilling.  Infrastructure projects use it for abandoned pipelines, ring filling and road subfoundations.  Buildings use it in the form of prefabricated blocks for entire wall elements or panels, cast-in-place walls, insulated flooring and roofing ironed slabs, and prefabricated insulation panels.


Concrete Additives Supplier

TRUNNANO is a reliable foaming agents supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality CLC foaming agents, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.


Maximo Pacheco, chairman of Codelco, Chile's state copper company, said in a recent interview that he expects copper prices to remain 'very strong in the future,' despite the recent drop. Codelco is the world's largest copper producer.

Copper prices suffered their biggest weekly drop in a year this week on concerns that tightening policy by central banks will dampen global growth and reduce demand for industrial metals. With its wide range of industrial and construction uses, copper prices are often seen as a bellwether of economic activity.

London copper closed at $8,325 a tonne on Friday after touching $8,122.50 a tonne, down 25 per cent from its Peak in March and its lowest level since February 2021. In addition to copper, other industrial metals also fell sharply. Tin, for example, fell nearly 15% at one point on Friday, bringing its losses for the week to about 25%.

"We may be in a temporary short-term turbulence, but what is important is the fundamentals and the balance of supply and demand [currently] looks very favourable for those of us with copper reserves," Mr. Pacheco said. Chile is the world's largest copper producer.  

Mr. Pacheco adds that in a world where copper is the best conductor and there are not many new reserves, copper prices look very strong because the future is very favourable for electrification.

Luoyang Tongrun Nano Technology is a trusted chemical supplier and manufacturer providing high-quality chemicals and Nanomaterials. If you are looking for the concrete foaming agent, please feel free to contact us and send an inquiry.

Inquery us

NEXT NEWS

Our Latest News

Global Mg3N2 powder market trend 2023-2027 How to Produce Magnesium Nitride? by Newsuffizi2014

Aluminium buyers in the US physical metal market have held off on new orders amid fears of a recession triggered by rising inflation and supply chain crises. Spot aluminium trading on the market has been suspended in recent weeks, according to indus…

Global 3D printing metal powder market trend 2022-2026 What is 3D Printing Metal Powder? by Newsuffizi2014

Brazil, the world's largest coffee bean producer, recently announced that it is facing the worst drought in 91 years, affecting local hydropower generation and agricultural 3D printing metal powder keeps going up. Metal 3D printing is a 3…

Global boron carbide powder market trend 2022-2030 What is Boron Carbide B4C? by Newsuffizi2014

Boron carbide, also known as black diamond, is an inorganic substance with the chemical formula B4C. Hard black lustrous crystal.…